ALTERECO products:
everything that keeps you warm
and saves your money


We are ALTERECO - because we offer an ecological alternative to older and more expensive heating solutions. We use the accumulated knowledge, and we take a step forward.
As a result, customers can order heating from us that offers even more for even less.


It is said that "better is the enemy of good." It is not the old solutions that have weakened, the new ones are better in all respects: you pay less, you harm the environment less, and your heating is just as effective.

Type of fuel
NEW INSULATED HOUSE (heat demand 100kWh / m2 / year)
 
ECO-QUENTIN - woodchip
 
PLN1350
 
Electricity G11
 
PLN9242
 
wood pellets 6mm
 
PLN3975
 
Natural gas
 
PLN3153
 
Fire wood
 
PLN2750
 
Coal Walnut
 
PLN2571
 
Air heat pump
 
PLN2520
 
Ecopea
 
PLN2457
 
Ground heat pump
 
PLN2288
Estimated annual cost of heating a house with an area of ​​150 m2, depending on the type of fuel.
 

Equal warmth for less money. This is what ALTERECO offers.

Each of our solutions is the result of years of perfecting details, conversations with clients and meticulous tests and calculations. These are our own proprietary technologies, experience and passion locked in technical drawings.

We worked on them thinking about the thousands of homes in which they were to operate: failure-free, efficient and economical.

We will be proud if we can talk to you about them.

 

ALTERECO products:
everything that keeps you warm
and saves your money


We are ALTERECO - because we offer an ecological alternative to older and more expensive heating solutions. We use the accumulated knowledge, and we take a step forward.
As a result, customers can order heating from us that offers even more for even less.


It is said that "better is the enemy of good." It is not the old solutions that have weakened, the new ones are better in all respects: you pay less, you harm the environment less, and your heating is just as effective.

Rodzaj paliwa
DOM NOWY OCIEPLONY (zapotrzebowanie na ciepło 100kWh/m2/rok)
 
Kocioł ECO-QUENTIN - zrębka drzewna
 
1350 zł
 
Prąd - taryfa całodobowa G11
 
9242 zł
 
Pellet drzewny 6mm
 
3975 zł
 
Gaz ziemny
 
3153 zł
 
Drewno opałowe - buk, grab
 
2750 zł
 
Węgiel orzech
 
2571 zł
 
Pompa ciepła powietrzna
 
2520 zł
 
Węgiel ekogroszek
 
2457 zł
 
Pompa ciepla gruntowa
 
2288 zł
Roczny szacunkowy koszt ogrzewania domu o powierzchni 150m2 w zależności od rodzaju paliwa.
 

Equal warmth for less money. This is what ALTERECO offers.

Each of our solutions is the result of years of perfecting details, conversations with clients and meticulous tests and calculations. These are our own proprietary technologies, experience and passion locked in technical drawings.

We worked on them thinking about the thousands of homes in which they were to operate: failure-free, efficient and economical.

We will be proud if we can talk to you about them.

 

Hybrid boilers for wood chips - ALTERECO ECO-QUENTIN

Contact us if you want to
order frugal
wood chip boiler.

Hybrid boilers for wood chips - ALTERECO ECO-QUENTIN

Contact us if you want to
order frugal
wood chip boiler.

 

Many of you have already heard about the replacement of existing boilers with modern ecological heating systems or are currently looking for a solution that could meet the assumptions imposed on us by the new regulations related to air purity. That is why we would like to present an innovative, but at the same time proven by thousands of our customers, a boiler of our production, which uses wood chips for combustion.

The results of exhaust gas purity tests speak for themselves about the advantage of this fuel over solid fuel (coal). However, we went a step further and beyond the obvious goal to achieve high efficiency and meet stringent exhaust gas purity standards in accordance with class 5, and the so-called ecodesign, we also took care to increase the economy of operation, using fuel that is generally available, ecological and economical, i.e. cheap..

 

Many of you have already heard about the replacement of existing boilers with modern ecological heating systems or are currently looking for a solution that could meet the assumptions imposed on us by the new regulations related to air purity. That is why we would like to present an innovative, but at the same time proven by thousands of our customers, a boiler of our production, which uses wood chips for combustion.

The results of exhaust gas purity tests speak for themselves about the advantage of this fuel over solid fuel (coal). However, we went a step further and beyond the obvious goal to achieve high efficiency and meet stringent exhaust gas purity standards in accordance with class 5, and the so-called ecodesign, we also took care to increase the economy of operation, using fuel that is generally available, ecological and economical, i.e. cheap..

Hybrid
wood chip boiler

It is currently the only solution among solid fuel biomass boilers, which will have a measurable impact on your savings and will be independent of the constantly growing prices of currently used fuels.

Cheapest heating


Highest Energy efficiency


Exceptional exhaust gas purity


Simple operating – easy cleaning


The minimum amount of ash


Efficiency control


Automatic ignition and shutdown


Easy control via internet

Hybrid means savings and
flexibility in the use of various biomass fuels.


Why? It's easy. Thanks to the use of a patented, innovative gutter burner with piston feeding of biomass in our boiler, we use unsorted sawmill chips as the basic fuel, which means that the fuel in the form of wood chips does not have to have a regular fraction (size), as is the case with e.g. pellets . The fuel in our hybrid boiler can be wood chips with dimensions from 1 cm to 4 cm or pellets. Thanks to this solution, we can use both of these fuels, gaining great flexibility. The choice is up to you. However, by using deciduous wood chips as the basic fuel, you will achieve over 40% savings in fuel costs compared to pellets.

As a producer of wood chips, we also guarantee constant deliveries in a convenient form, i.e. in foil bags weighing approx. 14 kg.


We recommend the hybrid ALTERECO ECO-QUENTIN boiler with a capacity of 22 kW for heating surfaces up to 250 m2, and when using a water buffer in the accumulation system, up to 350 m2. By using an accumulation buffer, e.g. with a capacity of 600 l, we also gain the possibility of instantaneous heating of central utility water (DHW).

Hybrid
wood chip boiler

It is currently the only solution among solid fuel biomass boilers, which will have a measurable impact on your savings and will be independent of the constantly growing prices of currently used fuels.

Cheapest heating


Highest Energy efficiency


Exceptional exhaust gas purity


Simple operating – easy cleaning


The minimum amount of ash


Efficiency control


Automatic ignition and shutdown


Easy control via internet

Hybrid means savings and
flexibility in the use of various biomass fuels.


Why? It's easy. Thanks to the use of a patented, innovative gutter burner with piston feeding of biomass in our boiler, we use unsorted sawmill chips as the basic fuel, which means that the fuel in the form of wood chips does not have to have a regular fraction (size), as is the case with e.g. pellets . The fuel in our hybrid boiler can be wood chips with dimensions from 1 cm to 4 cm or pellets. Thanks to this solution, we can use both of these fuels, gaining great flexibility. The choice is up to you. However, by using deciduous wood chips as the basic fuel, you will achieve over 40% savings in fuel costs compared to pellets.

As a producer of wood chips, we also guarantee constant deliveries in a convenient form, i.e. in foil bags weighing approx. 14 kg.


We recommend the hybrid ALTERECO ECO-QUENTIN boiler with a capacity of 22 kW for heating surfaces up to 250 m2, and when using a water buffer in the accumulation system, up to 350 m2. By using an accumulation buffer, e.g. with a capacity of 600 l, we also gain the possibility of instantaneous heating of central utility water (DHW).

Let nature breathe - BE ECO

Let nature breathe - BE ECO

Water buffers
accumulative CO and DHW

Heat buffers are dedicated to work with a low-temperature source. Equipped with a corrugated stainless steel circulation coil for instantaneous heating of domestic hot water, free from Legionella. The circulation coil for perfect heat removal is arranged in a spiral along the entire height of the buffer, taking into account the free space for installation of an electric heater in the middle of the tank height. Buffers are made of high quality steel.

Hygienic heat buffers are available in versions with three, two or one coil and capacities: 600, 800, 1000, 1500 and 2000 l.



Accumulation buffer 3D View

Advantages of the i HYGIENIC series tanks:


Ensure accurate heating of the entire water volume thanks to specially profiled coils


They cause low heat losses thanks to highly effective thermal insulation


They have a short heat-up time and high continuous DHW capacity. Thanks to large heat transfer surfaces


They are insulated with rigid polyurethane foam with low thermal transmittance


They have a connection for an electric heater in the middle of the tank height


It is characterized by a large surface of the DHW coil - 7.5 or 8 m² depending on the capacity

Water buffers
accumulative CO and DHW

Heat buffers are dedicated to work with a low-temperature source. Equipped with a corrugated stainless steel circulation coil for instantaneous heating of domestic hot water, free from Legionella. The circulation coil for perfect heat removal is arranged in a spiral along the entire height of the buffer, taking into account the free space for installation of an electric heater in the middle of the tank height. Buffers are made of high quality steel.

Hygienic heat buffers are available in versions with three, two or one coil and capacities: 600, 800, 1000, 1500 and 2000 l.


Accumulation buffer 3D View

Advantages of the i HYGIENIC series tanks:


Ensure accurate heating of the entire water volume thanks to specially profiled coils


They cause low heat losses thanks to highly effective thermal insulation


They have a short heat-up time and high continuous DHW capacity. Thanks to large heat transfer surfaces


They are insulated with rigid polyurethane foam with low thermal transmittance


They have a connection for an electric heater in the middle of the tank height


It is characterized by a large surface of the DHW coil - 7.5 or 8 m² depending on the capacity

Kotły Gigantic i Giganto dostępne tylko w mocy powyżej 500kW.
Dostępne na rynku Polskim

Gigantic
industrial boiler

A steel boiler with a low heat load, with a three-flame continuous furnace and five effective rotations of smoke and a water floor.

At the end of the combustion chamber, the opening connects to a cylindrical channel (second exhaust gas circuit), thus achieving a clear separation of exhaust gases from the furnace during the inversion phase, which is decisive for reducing nitrogen oxides (NOx).

In the last step, the exhaust gases converge towards the tube bundle through a recess made in the insulation of the closing door.


Dostępne modele kotła:

550
kW

800
kW

1000
kW

1400
kW

2000
kW

Gigantic
industrial boiler

A steel boiler with a low heat load, with a three-flame continuous furnace and five effective rotations of smoke and a water floor.

At the end of the combustion chamber, the opening connects to a cylindrical channel (second exhaust gas circuit), thus achieving a clear separation of exhaust gases from the furnace during the inversion phase, which is decisive for reducing nitrogen oxides (NOx).

In the last step, the exhaust gases converge towards the tube bundle through a recess made in the insulation of the closing door.


Dostępne modele kotła:

550
kW

800
kW

1000
kW

1400
kW

2000
kW

 
 

ALTERECO
Giganto series

A steel boiler with a low heat load, with a three-flame continuous furnace and five effective rotations of smoke and a water floor.

At the end of the combustion chamber, the opening connects to a cylindrical channel (second exhaust gas circuit), thus achieving a clear separation of exhaust gases from the furnace during the inversion phase, which is decisive for reducing nitrogen oxides (NOx).

In the last step, the exhaust gases converge towards the tube bundle through a recess made in the insulation of the closing door.

ALTERECO
Giganto Series

A steel boiler with a low heat load, with a three-flame continuous furnace and five effective rotations of smoke and a water floor.

At the end of the combustion chamber, the opening connects to a cylindrical channel (second exhaust gas circuit), thus achieving a clear separation of exhaust gases from the furnace during the inversion phase, which is decisive for reducing nitrogen oxides (NOx).

In the last step, the exhaust gases converge towards the tube bundle through a recess made in the insulation of the closing door.